Normcore 58.5mm V4 Spring Loaded Tamper

Normcore 58.5mm V4 Spring Loaded Tamper

$69.90

$69.90

or 3 payments of $23.30 with  

LatitudePay is available with checkout value above $100 SGD

A Precision TAMP EVERYTIME

The Normcore 58.5mm Spring Loaded Tamper allows you to tamp precisely before extraction, and its interchangeable spring allows user to pre-set the amount of the pressure guidance to ensure consistency every time. The V4 tamper has further improved on the central shaft design, also the interchangeable springs are now applicable to the central shaft which provides pressure directly to the coffee grounds. 

Normcore changes the way you tamp your espresso.

Product Code: Normcore58.5

Normcore 58.5mm V4 Spring Loaded Tamper
Normcore 53.3mm Tamper

Product Features

SPRING MECHANISM CONTROL
Highly stable spring mechanism ensures a consistent contact stability every time you tamp your coffee. The amount of pressure you apply is simply controlled by a pre-calibrated spring inside the tamper itself. Moreover, it comes with 3 interchangeable springs to suit your preference. This will guide new user to understand the amount of pressure required for a good precise tamp.

 

PRECISE TAMP FOR THE 58.8MM PORTAFILTER
At 58.5mm, the Normcore tamps it perfectly, leaving almost no coffee at the portafilter’s inner side-wall.

 

HIGH QUALITY 304 STAINLESS STEEL
The construction of the Normcore 58.5mm tamper itself is made of high quality 304 stainless steel, which is critical to deliver consistent pressure to your tamp and leaving a perfect finish as user tamps off.

 

LEVELLING GUIDE
The ingenious design of leveling plate ensures your tamping level every time by resting on top of the filter basket as you press down on ground coffee, which is an important factor in preventing espresso shots channelling.

Included Accessories

  • Spring Loaded Tamper x 1
  • Coffee Tamper Stand x 1
  • 30lb/13.6kg Calibrated Spring x 1
  • 25lb/11.3kg Calibrated Spring x 1 (Come Pre-installed)
  • 15lb/6.8kg Calibrated Spring x 1

Product Specifications

  • Brand: Normcore
  • Base Diameter: 58.5mm
  • Tamper Height: 98mm
  • Weight: 382g , 413g with tamper stand
  • Color: Matt Black Soft Touch
  • Material: Aluminum Alloy + Solid Food 304 Stainless Steel

Product Notes

INSTRUCTIONS
  • Place the tamper flat on top of your freshly ground coffee of the portafilter.
  • Ensure the rim of your tamper rest nicely around the perimeter of your portafilter.
  • Press down with one hand using the handle to compress the coffee.
  • Continue to press down with a consistent pressure until you feel the pressure from the second internal spring, indicating that you have achieved sufficient amount of tamping pressure.
  • Do a last polishing of the coffee bed in the portafilter by rotating the tamper gently clockwise / counter-clockwise (tamper twisting).
  • Tamper twist action should not be done excessively. Just a slight one-clean move will do.
HOW TO REPLACE INNER SPRING
  • Unfasten the tamping base, baffle, and outer spring from the handle. Next, remove the Core Sleeve from the handle.
  • *If the Core Sleeve still stays behind inside the handle, try to fasten the tamping base and unfasten the Core Sleeve together by turning counterclockwise.
  • Hold and press the top stud and bottom stud, remove the locking pin.
  • Replace the spring with your preference.

Package Details

Additional information

Weight0.8 kg
Dimensions10 × 8 × 15 cm

SPRING MECHANISM CONTROL
Highly stable spring mechanism ensures a consistent contact stability every time you tamp your coffee. The amount of pressure you apply is simply controlled by a pre-calibrated spring inside the tamper itself. Moreover, it comes with 3 interchangeable springs to suit your preference. This will guide new user to understand the amount of pressure required for a good precise tamp.

 

PRECISE TAMP FOR THE 58.8MM PORTAFILTER
At 58.5mm, the Normcore tamps it perfectly, leaving almost no coffee at the portafilter’s inner side-wall.

 

HIGH QUALITY 304 STAINLESS STEEL
The construction of the Normcore 58.5mm tamper itself is made of high quality 304 stainless steel, which is critical to deliver consistent pressure to your tamp and leaving a perfect finish as user tamps off.

 

LEVELLING GUIDE
The ingenious design of leveling plate ensures your tamping level every time by resting on top of the filter basket as you press down on ground coffee, which is an important factor in preventing espresso shots channelling.

  • Spring Loaded Tamper x 1
  • Coffee Tamper Stand x 1
  • 30lb/13.6kg Calibrated Spring x 1
  • 25lb/11.3kg Calibrated Spring x 1 (Come Pre-installed)
  • 15lb/6.8kg Calibrated Spring x 1
  • Brand: Normcore
  • Base Diameter: 58.5mm
  • Tamper Height: 98mm
  • Weight: 382g , 413g with tamper stand
  • Color: Matt Black Soft Touch
  • Material: Aluminum Alloy + Solid Food 304 Stainless Steel
INSTRUCTIONS
  • Place the tamper flat on top of your freshly ground coffee of the portafilter.
  • Ensure the rim of your tamper rest nicely around the perimeter of your portafilter.
  • Press down with one hand using the handle to compress the coffee.
  • Continue to press down with a consistent pressure until you feel the pressure from the second internal spring, indicating that you have achieved sufficient amount of tamping pressure.
  • Do a last polishing of the coffee bed in the portafilter by rotating the tamper gently clockwise / counter-clockwise (tamper twisting).
  • Tamper twist action should not be done excessively. Just a slight one-clean move will do.
HOW TO REPLACE INNER SPRING
  • Unfasten the tamping base, baffle, and outer spring from the handle. Next, remove the Core Sleeve from the handle.
  • *If the Core Sleeve still stays behind inside the handle, try to fasten the tamping base and unfasten the Core Sleeve together by turning counterclockwise.
  • Hold and press the top stud and bottom stud, remove the locking pin.
  • Replace the spring with your preference.

Package Details

Additional information

Weight0.8 kg
Dimensions10 × 8 × 15 cm
Your Opinion Matters

1 review for Normcore 58.5mm V4 Spring Loaded Tamper

  1. Anonymous (verified owner)

    Easy to use and solid tamp

Add a review

Your email address will not be published.

You May Also Like

LatitudePay Promotion

Apply Code “CNY2020” At LatitudePay Installment Page
Valid from 15 – 31 January 2022

*Limited to first time LatitudePay Users
Limited to first 200 redemptions

BrewRatio

Free Local Delivery For Orders Over $200 SGD

  • Order total must be equal or more than $200.00 SGD after all discounts, and before shipping, handling and taxes are added.
  • Please checkout with the free shipping option.
  • The offer is for a limited period only.
  • Applies to domestic STANDARD shipping only. If the shipment is international, shipping charges will apply.
  • Free Shipping is only applicable for STANDARD Shipping only. 
  • Additional duties, taxes or fees may apply to International Shipments.
  • Offer is non-transferable and subject to change without notice. Other restrictions may apply. 
LatitudePay Logo

BE THE SAVVY CUSTOMER AND
CHOOSE LATITUDEPAY AT
CHECKOUT

Pay-only-1_3-today-icon

PAY ONLY 1/3
TODAY

We pay the store full, and you pay us in 3 instalment, 0% interest with no hidden fees

Usebothcreditn-debitcard.gif

USE BOTH
DEBIT OR
CREDIT CARD

No credit card? No problem! We accept any Singapore Banks issue debit cards.

Earncashbackicon

EARN 1.5%
CASHBACK

Have more cash to spare? Pay more upfront and earn additional 1.5% cashback from us!

PAY WITH YOUR PREFERRED PAYMENT METHODS

visa
mastercard
American-express

Terms and Condition Applies.
See full T&C here >>

BREWRATIO WARRANTY POLICY

BrewRatio product warranty period coverage is stated at at the product page itself for products eligible for warranty. Warranty coverage is only valid for products qualified for warranty.

Product warranty period coverage is non-transferable, and its validity starts from the date of purchase.

Should your product purchased consists of a defect related to electrical fault within the warranty period, please contact BrewRatio for verification before arranging to have your original product returned to us.

If the product, or one of its parts qualifies for replacement or service under the warranty, please make arrangement and send the faulty product to BrewRatio’s Service center. Typical turn around time for addressing warranty claims including repairing is up to 21 business days (under normal circumstances), depend the type of damage or warranty claim.

Warranty coverage does NOT include :

  • Cosmetic damages (examples include scratches, imprint/water marks, cracks and dents, stains, etc.)
  • Products that have been damaged directly or indirectly from the use of a third party product.
  • Products damaged as a result of acts of nature e.g. fire, flood, or lightning.
  • Products damaged as a result of connection to irregular current or voltage sources, or use on electric or other current or voltage other than that marked on the Product, or any instruction book.
  • Products damaged as a result of misuse which caused the fault, or repair done by consumers themselves OR someone without the professional related expertise.
  • Products for which a consumer has no Proof of Purchase or for which the applicable Warranty Period has expired.
  • Normal wear and tear.
  • Damages to product due to abuse, mishandling, accident or failure to follow operating instructions.